25mm Perforated White Color Aluminum Honeycomb Ceiling Panels

This composite panel is made from two aluminium alloy sheets as skins and aluminum honeycomb as the core. The honeycomb structure gives the panel better flatness and strength than traditional aluminium ceiling tiles, meanwhile, the honeycomb ceiling panel can be made in larger size and manufactured into curved or angled shapes.

The perforation on top aluminum skin of the panels to give good sound insulation performance. And the non-woven fabric bewteen the perforated aluminum skin and the honeycomb core will prevent the glues come out from inside, so the perforated aluminum surface is clean with decorative beauty.

The top aluminum skin is first coated with different colors, then be perforated before composition.

Production Specification:

Perforation:Diameter 2.5mm,3.0mm etc

Aluminum alloy	Aluminum alloy 5052/3003
Temper	H24
Honeycomb panel thickness	3.5-300mm
Dimension	Width: up to 2000mm Length: up to 16000mm
Aluminum face sheet	Thickness: 0.5-1.2mm
Aluminum base sheet	Thickness: 0.5-1.2mm
Honeycomb core	Aluminum alloy 3003 H24 Cell size: 1/2inch, 1/4inch, 3/8inch Foil thickness: 0.04mm, 0.05mm, 0.06mm, 0.07mm
Adhesive	Polymer adhesive film Bio-component modified epoxy resin. Bio-component modified polyurethane
Coating	Fluorocarbon roller coating PE coating Powder coating
Color	Pure white, Metallic color, RAL & Pantone Color
Special color	Wooden grain and stone grain

Features:

• Low weight and competitive cost
• High stiffness and strength
• Easy to fabricate and install
• Recyclable
• PVDF coating or anodized finish aluminum facing skins for good anti-corrosion performance and high resistance.
• Aluminium facing skins are available in a range of thicknesses from 0.5mm to 3.0mm as per design requirements
• Panels can be produced with different aluminum sheet thicknesses on front and back faces and panel thicknesses as per custom design requirements for weight, strength and installation.
• Aluminum faced panels are chemically cleaned: suitable for painting or the application of decorative laminates
• Brushed and anodised aluminum finishes are also available
• Aluminum honeycomb cell size is 4mm to 8mm as request.
• Wide selection of Joiners &Assembly Accessories are available.

Manufacturing Procedure

Roller coating or anodized surface, unrolling and cutting aluminium sheets, punching corners, bending aluminum sheets, supplying adhesive (glue) to front and back panels, unfolding aluminum honeycomb core, cutting out and putting honeycomb core into back panel, putting front panel, fixing front and back panels, putting sandwich panels into laminating machine, laminating, checking and finishing. To make panels ready for installation (for architecture cladding and decoration), asembling accessories to the panels and then packing for shipping.

Packing and Container Loading

There will be protective film on each panel.

Foshan Wonderful Composite Materials co., Ltd is specialized in composite materials research and development, production and sales.